why choose Monotek? Fast – curing & Rapid application
MONOTEK® MMA flooring is fully cured in one (1) hour ready for full traffic, which means less production downtime & inconvenience. MONOTEK® MMA cures at temps down to minus 25°C; so it can be applied in operating freezers/coolrooms or during winter months & still cures in eight (8) hours ! Floor areas of up to 400m˛ can be totally prepared, primed & coated in 48 hours, ready for full traffic one (1) hour later. Reslient & Jointfree
MONOTEK® MMA flooring is based on the worlds highest quality and most technically advanced methylmethacrylate resins, which provide uniquely "plastic" flooring surfaces that are able to withstand the toughest impacts due to its built-in flexibility. MONOTEK® can be laid without the requirement of re-cutting most expansion jointing, as it is able to move and flex unlike other trowel-applied systems. Tough/ hardwearing
Suitable for the harshest impact & abrasion areas. Low maintenance requirements – totally recoatable/ repairable. Highly chemical resistant (refer "MONOTEK® chemical resistance chart")
Totally resistant to most commonly used process and cleaning chemicals, including highly concentrated acids & alkalis. Resin Rich
MONOTEK® MMA flooring systems contain on average 50% resin content by weight when mixed with our special graded silica fillers and pigments. This is the lowest ratio of sand of any commercially available applied flooring in Australia. This high resin ratio ensures the maximum flexibility,durability & chemical resistance.
Most epoxy or polyester / vinyl ester based flooring only contain a max. 20-30 % resin content. Why pay for extra sand? Wide range of solid colours & coloured sand finishes. Can be applied at varying thickness
From 2mm-200 mm -ideal for repairing/resurfacing extremely damaged areas or building up areas such as covings /kerbs. Total flooring system
MONOTEK® MMA flooring systems offer you the total solution to all flooring problems. The MONOTEK® range includes highly flexible joint fillers & flooring (MONOTEK® 100 ,430), ultra tough, high build coatings (MONOTEK® 412,410 & 330), extra chemically resistant coatings (MONOTEK® 520/ 525) , adhesion promoters for ceramic tile and metallic coatings and many more. Tried and proven system
MONOTEK® MMA flooring systems have been applied in a wide variety of industrial & commercial applications in Australia and internationally over the past twenty - five (25) years. Non-Toxic
MONOTEK® MMA based flooring systems are non-toxic, environmentally freindly and do not contain any harmful aromatic solvents, amines or styrene. Total "real" warranty
As MONOTEK® flooring systems are applied & marketed exclusively by D.P.J. Coating Systems Pty Ltd, our warranty of performance covers your company totally - application workmanship and quality of materials. No worthless joint manufacturer & applicator warranties; our warranty is a total commitment that if the flooring system fails, we will repair the flooring system at no cost ( and without lengthy & costly discussion) to your company.
| 
